The product adopts a fresh breath odorless formula and can substantially reduce residual odor. Odorless and free of 7 additives, it possesses higher permeability and can seal and strengthen the substrate to provide better wall protection.

It is widely used in the interior wall decoration and protection of villas, hotels, hospitals, schools, office buildings and homes.

Main ingredients: Water, pigment, filler, emulsion and auxiliaries.

Super Healthy, Super Caring

3TREES Health+ Water-Based Coating Standard

China Green Product Certification

UL GREENGUARD Gold Certification 

French Indoor Air Emissions A+ Certification

China Environmental Labelling Product Certification

Highly efficient, odorless

Free of 7 additives

Full-Effect Primer for Better Wall Protection

Efficient resistance to mold

Big coating area

Strong resistance to alkali

Outstanding sealing performance

Good adhesion

Easier application

1. China Green Product Certification: Certified according to GB/T 35602-2017 Green Product Assessment - Coating Material

2. Free from 7 additives: No added VOC, formaldehyde, benzene substances (benzene, toluene, xylene, and ethylbenzene), excessive heavy metal pigments and fillers, APEO, ethylene glycol ether and ether ester, as well as PAEs. For details, refer to the China Environmental Labelling Product Certification Requirements.

Application Instructions

The surface must be clean, dry, neutral, flat, free of floating ash, oil stains and foreign substances. Water-leaking positions must undergo waterproof treatment. Before coating, the surface should be polished and leveled to ensure that the surface humidity of the pre-coated substrate is <10% and the pH value is <10. Paint surface effect will depend on substrate flatness.

Application Conditions

Wall temperature ≥ 5 ℃, humidity ≤ 85%, well-ventilated.

Application Method

Brushing, rolling, or spraying.

Dilution Ratio

Dilution ratio: Dilute with clean water (to a suitable proportion).

Theoretical Paint Consumption

12-14m2/L/round (paint film is calculated as 30μm, and actual consumption varies slightly with substrate roughness and porosity).

Recoating Time

Surface drying 30-60 minutes, hard drying 2 hours, and recoating interval 2-3 hours (which may be duly extended under low-temperature and high-humidity conditions)

Maintenance Duration

7 days / 25℃, which may be duly extended under low-temperature, high-humidity conditions to obtain a solid film effect. In the process of paint film maintenance and daily use, it is suggested that doors and windows should be closed for dehumidification in high humidity weather (such as Wet Spring and Plum Rain).

Substrate Treatment

1. New wall: Thoroughly remove surface dust, oil stains, loose plaster, etc., and repair any holes to ensure that the wall surface is clean, dry and smooth.

2. Re-painting wall: Thoroughly remove the original paint film and putty layer, clean surface dust, and level, polish, clean and thoroughly dry the surface, so as to avoid problems left over from the old wall (odor, mildew, etc.) affecting the application effect.

*Before coating, the substrate should be checked; coating can only start after the substrate passes acceptance inspection.

Coating System

For best effect, please use this product together with 3TREES primer.

Substrate treatment (3TREES substrate treatment product series) - primer (Fresh Breath Odorless All-in-1 Primer) - apply 1 round - topcoat (3TREES Fresh Breath Wall Paint Series) – apply 2 rounds

Tool Cleaning

After or between applications, please clean the tools with clean water in time in order to prolong tool life. The packaging bucket can be recycled after cleaning, and packaging waste may be recycled for reuse.

1. This product should be sealed and stored at 0-40℃ in a cool and dry place and away from exposure to the sun.

2. Refer to the product label for production date, batch number and expiration date.