345g*24/set

Applies to most substrate materials: wood, stone, metal, ceramics, glass, plastics, rubber, plaster board, fiber board, various artificial materials, artwork, etc. Applies widely to construction, advertising, decoration and manufacturing.

Quick drying, highly adhesive, easy to apply

1. Clean the substrate surface, until it is free of oil, stain and dust;
   

2. Cut the top of the hose, use the glue mouth to pierce the inner aluminum foil, cut the mouth 45° into desired size and shape, put the mouth onto the hose and then connect the hose to the gun;
   

3. Apply glue to the substrate surface in dots, stripes or zigzags. Single-side application is sufficient.
   

Dry Gluing

Apply glue to one surface, press the two surfaces together, pull them apart, leave them for 3-5 minutes (no longer than 10 minutes), and then press them together again, to achieve quick positioning.

Wet Gluing

Apply glue to one surface, press the two surfaces together, and immediately apply tape or clip; remove the tape or clip when primary adhesion is achieved (in about 24 hours).

Notes

• Positioning aid is not necessary for flat gluing or light object gluing.
  

• Primary-stage positioning aid is necessary when heavy objects are glued to facades, whether in dry or wet gluing.

1. JC/T2186-2013 Mastic Adhesives for Fixing Wallboards

2. GB18583-2008 Indoor Decorating and Refurbishing Materials - Limit of Harmful Substances of Adhesives

This product can be stored for 12 months in a cool, dry place, below 30°C.

1. Prevent accidental eating by children; avoid contact with skin or eye;

2. Keep away from flammables; application shall be made in well-ventilated place;

3. Avoid application in high-temperature environments, such as in metal roofs or heat pipes; not applicable to long-soaked, oil leaking or plasticizer materials;

4. This product, in all its technical aspects, is made strictly according to standards. However, due to varying climates and way of use, a performance test should be conducted before formal use to achieve desired effect.