The 3TREES (New) Fresh and Odorless Wall Paint is the first premium interior wall emulsion paint in China to pass German Blue Angel Certification. Efficient and odorless, this product adopts a fresh air formula and is free of formaldehyde, benzene and other VOCs. It conforms to German Blue Angel Certification and has strict quantity requirements on VOCs and environmentally hazardous preservatives, thus creating a healthy and environment-friendly home environment for you. At the same time, the product has passed UL GREENGUARD Gold Certification, French Indoor Air Emissions A+ Certification and China Green Product Certification, meets the more stringent Health+ Water-Based Coating Standard and can provide better home protection.

It is widely used in the interior wall decoration and protection of villas, hotels, hospitals, schools, office buildings and homes.

Main ingredients: Water, pigment, filler, emulsion and auxiliaries.

Super Healthy, Super Caring

3TREES Health+ Water-Based Coating Standard

German Blue Angel Certification

China Green Product Certification

UL GREENGUARD Gold Certification

French Indoor Air Emissions A+ Certification

China Environmental Labelling Product Certification

Highly efficient, odorless

Outstanding Functions and Better Odor Performance

Fresh air formula and select premium raw materials to minimize odor

No additives: No added VOC or additives.

Comprehensive Functions and Better Wall Surface Effect

High scrub resistance

Excellent hiding power

Strong resistance to alkali

Smooth hand feel

Endurable brightness

Can be made into light colors

Easier application

Notes:

China Green Product Certification: Certified according to GB/T 35602-2017 Green Product Assessment - Coating Material

The Fresh Air Blue Angel Premium Set includes 2 cans of 5L fresh breath topcoat (meeting the requirements of German Blue Angel Certification) and 1 can of 3TREES 5L Angel Primer. Primer + topcoat gives more enduring effect.

Application instructions: The surface must be clean, dry, neutral, flat, and free of floating ash, oil stains and foreign substances. Water-leaking positions must undergo waterproof treatment. Before coating, the surface should be polished and leveled to ensure that the surface humidity of the pre-coated substrate is <10% and the pH value is <10. Paint surface effect will depend on substrate flatness.

Application conditions: Wall temperature ≥ 5 ℃, humidity ≤ 85%, well-ventilated.

Application method: Brushing, rolling, or spraying.

Dilution ratio: Dilute with clean water. It is recommended that the dilution ratio should not exceed 20% (weight ratio).

Theoretical paint consumption: 12-14m2/L/round (paint film is calculated as 30μm, and actual consumption varies slightly with substrate roughness and porosity).

Recoating time: Surface drying 30-60 minutes, recoating interval 2-3 hours (which may be duly extended under low-temperature and high-humidity conditions).

Maintenance time: 7 days / 25℃, which may be duly extended under low-temperature, high-humidity conditions to obtain a solid film effect. In the process of paint film maintenance and daily use, it is suggested that doors and windows should be closed for dehumidification in high humidity weather (such as Wet Spring and Plum Rain).

Substrate Treatment:

1. New wall: Thoroughly remove surface dust, oil stains, loose plaster, etc., and repair any holes to ensure that the wall surface is clean, dry and smooth.

2. Re-painting wall: Thoroughly remove the original paint film and putty layer, clean surface dust, and level, polish, clean and thoroughly dry the surface, so as to avoid problems left over from the old wall (odor, mildew, etc.) affecting the application effect.

*Before coating, the substrate should be checked; coating can only start after the substrate passes acceptance inspection.

Coating System:

For best effect, please use this product together with the 3TREES primer in the product set.

Substrate treatment (3TREES substrate treatment product series) - primer (Angel Primer) - apply 1 round - topcoat – apply 2 rounds

Tool Cleaning: After or between applications, please clean the tools with clean water in time in order to prolong tool life. The packaging bucket can be recycled after cleaning, and packaging waste may be recycled for reuse.

1. This product should be sealed and stored at 0-40℃ in a cool and dry place and away from exposure to the sun.

2. Refer to the product label for production date, batch number and expiration date.