It is the first high-quality interior wall emulsion paint to pass the new German Blue Angel environmental standard in China. Based on the fresh breath formula, the product is highly efficient and odorless and sets strict limits on the content of volatile organic compounds (VOC), semi-volatile organic compounds (SVOC) and environmentally hazardous preservatives as specified by the Blue Angel standard. The product contains no added preservatives and fungicides, formaldehyde, benzene, other volatile organic compounds (VOC), and semi-volatile organic compounds (SVOC), meeting the more stringent Health+ Water-Based Coating Standard, creating a healthy and environmental-friendly home environment for you.

The Fresh Breath Odorless All-in-One Wall Paint is certified by the German Blue Angel standard and meets the 3TREES Health+ standard, bringing you an odorless new home space in 8 hours.

It is widely used in the interior wall decoration and protection in villas, hotels, hospitals, schools, office buildings and homes.

Main ingredients: water, pigment filler, emulsion, and auxiliaries.

Super Healthy, Super Caring

3TREES Health+ Water-Based Coating Standard

German Blue Angel Certified

China Green Product Certification

UL GREENGUARD Gold Certification

French Indoor Air Emissions A+ Certification

China Environmental Labelling Product Certification

Highly efficient, odorless

Free of 7 additives

Outstanding performance, purer odor

Fresh breath formula  Strictly selected quality raw materials, to minimize odor

• China Green Product Certification: Certified according to Green Product Assessment - Coating Material (GB/T 35602)

• German Blue Angel Certified: Certified based on Low-Emission Interior Wall Paints (DE-UZ 102: 2019)

• Health+ water-based coating standard: Tested based on the Enterprise Standard of SKSHU Paint Co., Ltd. (Q/SKSP 038);

• Free of 7 additives: No added VOC, formaldehyde, benzene substances (benzene, toluene, xylene, and ethylbenzene), pigments and fillers with excessive heavy metals, APEO, ethylene glycol ether and ether ester, as well as PAEs. For specific categories, see the requirements of China Environmental Labelling Product Certification.

Application instructions: The surface must be clean, dry, neutral, flat, and free of floating ash, oil stains, and foreign substances. Water-leaking positions must undergo waterproof treatment. Before coating, the surface should be polished and leveled to ensure that the surface humidity of the pre-coated substrate is less than 10% and the pH value is less than 10.

Application conditions: Wall temperature ≥ 5°C, humidity ≤ 85%, well-ventilated.

Application method: Brushing, rolling, or spraying.

Dilution ratio: Dilute with clean water to a proper viscosity. It is recommended that the dilution ratio should not exceed 20% (weight ratio).

Theoretical paint consumption: 12–14 m²/L/round (rolling) (paint film is calculated as 30 μm, and actual consumption varies slightly with the roughness and porosity of substrate).

Recoating time: Surface drying for 30–60 minutes, recoating at an interval of 2–3 hours (which may be duly extended under low-temperature and high-humidity conditions).

Maintenance time: 7 days/25°C, which may be duly extended under low-temperature (not lower than 5°C) and high-humidity conditions to obtain solid paint film. In the process of paint film maintenance and daily use, it is suggested that doors and windows should be closed for dehumidification in high humidity weather (such as Wet Spring and Plum Rain).

Substrate treatment:

1. New wall: Thoroughly remove surface dust, oil stains, loose plaster, etc., and repair any holes to ensure that the wall surface is clean, dry and smooth.

2. Re-painting wall: Thoroughly remove the original paint film and putty layer, clean surface dust, and level, polish, clean and thoroughly dry the surface, to prevent the problems left over from the previous wall (odor, mildew, etc.) affecting the application effect.

*Before coating, the substrate should be checked. Coating can only start after the substrate passes acceptance inspection.

Coating system:

For best effect, please use this product together with 3TREES one-stop wall decoration solutions.

Substrate treatment (3TREES substrate treatment product series) – primer (3TREES angel series primer, one round) – topcoat (fresh breath odorless all-in-one wall paint (German Blue Angel Certified), two rounds)

Tool cleaning:

After or between applications, please clean the tools with clean water in time to prolong the service life of tools.

The packaging bucket can be recycled after cleaning, and packaging waste may be recycled for reuse.

It must be sealed and stored in a cool and dry place (0-40°C) by avoiding exposure to the sun.

It is not recommended to use this product for color matching.