The Pure Anti-fungal Alkali-resistant Odorless Wall Paint uses strictly selected quality emulsion and odorless formula, and implements strict quality control from raw materials to production, to create a fresh and healthy home environment for you. It meets Class-0 mold resistance and can effectively resist the growth of mold under humid conditions. It features high whiteness, excellent hiding power, high coverage, and alkali resistance, providing multi-faceted protection for your home walls. It is suitable for painting the walls of well decorated houses, corridors, ceiling tops, entrance areas, offices, and other types of space.

Super Healthy, Super Caring

Odorless and environmental-friendly

China Environmental Labelling Product Certification

No artificial addition of formaldehyde, benzene and benzene series

Excellent Functions, Protect Your Wall Better

Class-0 Mold Resistance, Keeping Walls Away From Mold

Practical  Functions to Eliminate Many Common Wall Hazards

High whiteness

Excellent hiding power
High coverage

Alkali resistance

Application instructions: The surface must be clean, dry, neutral, flat, and free of floating ash, oil stains, and foreign substances. Water-leaking positions must undergo waterproof treatment. Before coating, the surface should be polished and leveled to ensure that the surface humidity of the pre-coated substrate is less than 10% and the pH value is less than 10.

Application conditions: Wall temperature ≥ 5°C, humidity ≤ 85%, well-ventilated.

Application method: Brushing, rolling, or spraying.

Dilution ratio: Dilute with clean water to a proper viscosity. It is recommended that the dilution ratio should not exceed 20% (weight ratio).

Theoretical paint consumption: 12–14 m²/L/round (rolling) (paint film is calculated as 30 μm, and actual consumption varies slightly with the roughness and porosity of substrate).

Recoating time: Surface drying for 30–60 minutes, recoating at an interval of 2–3 hours (which may be duly extended under low-temperature and high-humidity conditions).

Maintenance time: 7 days/25°C, which may be duly extended under low-temperature (not lower than 5°C) and high-humidity conditions to obtain solid paint film. In the process of paint film maintenance and daily use, it is suggested that doors and windows should be closed for dehumidification in high humidity weather (such as Wet Spring and Plum Rain).

Substrate treatment:

1. New wall: Thoroughly remove surface dust, oil stains, loose plaster, etc., and repair any holes to ensure that the wall surface is clean, dry and smooth.

2. Re-painting wall: Thoroughly remove the original paint film and putty layer, clean surface dust, and level, polish, clean and thoroughly dry the surface, to prevent the problems left over from the previous wall (odor, mildew, etc.) affecting the application effect.

*Before coating, the substrate should be checked. Coating can only start after the substrate passes acceptance inspection.

Coating system:

For best effect, please use this product together with 3TREES one-stop wall decoration solutions.

Substrate treatment (3TREES substrate treatment product series) – primer (3TREES primer series, one round) – topcoat (pure anti-fungal alkali-resistant odorless wall paint, two rounds)

Tool cleaning:

After or between applications, please clean the tools with clean water in time to prolong the service life of tools.

The packaging bucket can be recycled after cleaning, and packaging waste may be recycled for reuse.