Disclosure on Environmental Information of SKSHU Paint Co., Ltd. in 2018

tagsTypes Of Green Paint

I. Basic information

SKSHU Paint Co., Ltd. (hereinafter referred to as "3TREES") is located in Licheng Economic Development Zone, Putian City as the industrial zone is situated in the center of Hanjiang and Licheng Districts where the main roads such as Fuxia Road, South Shaolin Road and Lihan Avenue form a checkerboard road network with convenient transportation. 3TREES is bordered by Dongchuan Road in the north, a land for other industrial purposes in the Zone in the south, Donghu Road in the east, and Jiaozhan West Road in the west, i.e. 3TREES is at 25.47 north latitude and 119.04 east longitude. Its address is 518 Liyuan North Avenue, Putian City, Fujian Province, its legal representative is Hong Jie, and its unified social credit code is 91350300751385327E. The contact phone number is 400-8823-777/800-8584-333.


The business of SKSHU Paint Co., Ltd. covers production and sales of coatings, adhesives, emulsions, curing agents, daily chemicals and other chemical auxiliary materials, and technical testing services.


The designed annual output of SKSHU Paint Co., Ltd. (Putian factory) is 10,300t/a of alkyd resins, 1,500t/a of acrylic resins, 1,500t/a of light-cured resins, 1,500t/a of unsaturated resins, 4,800 t/a of curing agents, 327,000 t/a of water-based coatings, 30,000 t/a of wood paints and 25,000 t/a of adhesives. The SKSHU Paint Co., Ltd. (Putian Factory) covers an area of 174,186m2.


Fujian Sanjiang Packaging Co., Ltd. is located in Licheng Economic Development Zone, Putian City (within SKSHU Paint Co., Ltd. (Putian Factory)), which mainly produces tinplate packaging cans with a designed annual output of 2.975 million cans of 18L round buckets, 1 million cans of 18L square buckets, 1.134 million 5L round cans, 1.134 million 4L round cans, 4.5 million 2L round cans, 1.1592 million 1L square cans, 2.4192 million 2L square cans and 2.4192 million 4L square cans. And the project covers an area of 14,150m2.


Tianjin SKSHU Paint Co., Ltd. (Tianjin Factory) was established in 2013, renting an existing industrial plant in Shuangkou Town Industrial District, Beichen District, Tianjin, with purchased production equipment and waste gas and sewage treatment facilities to produce latex paints, texture paints and natural stone paints. And its annual output designed is 20,000 tons of latex paints, 30,000 tons of texture paints and natural stone paints, and 10,000 tons of putty powder. The project passed the environmental protection approval on October 25, 2014.


Henan SKSHU Paint Co., Ltd. (Henan Factory), established on March 22, 2016, is located in the industrial clustered area of Nanzhao County, Nanyang City, Henan Province with a rented industrial plant of about 19,677㎡, and is mainly engaged in the production of water-based coatings and accessories. Its annual output designed is 200,000 tons of water-based coatings and 3 million packaging tanks. Also, the first phase of the 100,000-ton water-based coating project passed the environmental protection approval on August 29, 2017. The newly expanded phase II project for water-based paints with an annual output of 100,000 tons passed environmental protection assessment and approval on October 29, 2018, and the project with an annual output of 300 packaging buckets passed the approval on December 28, 2018.


Sichuan SKSHU Paint Co., Ltd. (Sichuan Factory) was established on April 9, 2015 and located in Qionglai Industrial Park, Tianfu New District. The total area is about 221,321.33m2, and is mainly engaged in the production of coatings and accessories. The annual output designed include 5,000t of alkyd resins, 5,000t of curing agents, 30,000t of wood paints, 15,000t of water-based adhesives, 50,000t of natural stone and texture paints, 60,000t of emulsion paints, 30,000t of putty powders, 12 million packaging tanks, 10,000t/a of polyurethane waterproof coatings, 3 million ㎡/a of integrated boards, 20 million ㎡/a of modified asphalt waterproofing membranes with base, 7 million ㎡/a of polymer waterproofing membranes and 5 million㎡/a of non-asphalt self-adhesive waterproofing membranes. And the alkyd resin production line has not been built yet, polyurethane waterproofing coating, integrated board and waterproofing membrane production lines are under construction, and other production lines have been completed and approved.


Anhui SKSHU Paint Co., Ltd. was established in November 2017 and is mainly engaged in the production and sales of coatings, waterproof materials, new insulation materials, adhesives and other chemical products and packaging materials. And the company has invested in the construction of paint producing and supporting projects in Mingguang City Chemical Industry Concentration Zone, Anhui Province. Upon completion, it could achieve an annual output of 300,000 tons of latex paints, 200,000 tons of natural stone and texture paints, 15,000 tons of waterproof paints, 20,000 tons of granite paints, 300,000 tons of putty powders, 40,000 tons of tile adhesives, 5,000 tons of interface agents, 30 million cans, 20 million square meters of modified asphalt waterproofing membranes with base, 14 million square meters of polymer waterproofing membranes, 30,000 tons of water-based adhesives, 60,000 tons of polyurethane waterproofing coatings and other products. Now the project is under construction.


II. The Construction and Operation of Pollution Control Facilities

1. SKSHU Paint Co., Ltd. (Putian Factory)

Acting in strict accordance with the "Three Simultaneities" requirements for construction projects, the company has enhanced its environmental protection facilities to ensure the stable and qualified discharge of various environmental factors. The workshops are equipped with dust removal and degassing facilities, sewage treatment stations are established, solid waste storage yards are up to the standards, and measures such as wind and rain protection, leakage and loss prevention are taken. The main environmental protection facilities are:

(1) VOC treatment and dust removal devices: In wood paint A and B workshops, and adhesive and resin workshops, pulse sedimentation dust removal and zeolite runner RTO combustion devices are adopted to treat organic waste gas; the solvent for which is adsorbed in the gap of zeolite runners through the porosity of zeolite runners and the tension of the gap surfaces so that the discharged waste gas is purified. When zeolite wheels are saturated with the solvent, the latter is desorbed and regenerated by hot air, and the detached organic matter is oxidized at a high temperature to convert the organic waste gas into carbon dioxide and water. In latex paint and texture paint workshops, sedimentation dust removal devices are used to remove dust in waste gas and reduce the emission of harmful substances such as particles in the gas.


(2) Sewage treatment stations: waste water from reactor cleaning, workshop floor washing and laboratory as well as sanitary sewage from workshop employees is treated by the existing sewage treatment stations, discharged into the municipal sewage pipe network after measuring up to the standard, and merged into Minzhong Waste Water Treatment Plant for further treatment. And at the sewage treatment stations is adopted a combination of physical and biochemical treatment as well as processes of grid filtering, sedimentation and biological contact oxidation of stable treatment effect and high pollutant removal rates. Resin organic waste water treatment is done by a set of sewage treatment equipment (catalytic micro-electrolysis devices, ultra-high load integrated bio-reactors, circular biological reaction devices, up-flow anaerobic filters, photo-Fenton oxidation devices, hydrolysis devices, flocculation precipitator, etc.). Upon reaching the standard, the waste water is discharged into the municipal sewage pipe network and merged into Minzhong Waste Water Treatment Plant for further treatment.


These environmental protection measures have enabled the company to meet the emission standards approved by EIA in terms of treated sewage and waste gas, and environmental protection requirements for factory boundary noise. And all of the environmental protection facilities could run stably, with the synchronous operation of the facilities up to the requirements.


2. Fujian Sanjiang Packaging Co., Ltd.

Strictly following the requirements of "Three Simultaneities" for construction projects, Sanjiang Packaging has improved its environmental protection facilities to ensure the stable and qualified discharge of various environmental factors. The workshops are equipped with three sets of gas collection systems. As a result, its environmental protection facilities could run stably with the synchronized operation of facilities up to the requirements.


3. Tianjin SKSHU Paint Co., Ltd. (Tianjin Factory)

Strictly following the "Three Simultaneities" requirements for construction projects, it has improved its environmental protection facilities to ensure the stable and qualified discharge of various environmental factors. The workshops are equipped with three sets of down-flow dust collectors to remove the dust in the exhaust gas, and discharge is conducted after the treatment reaches the standards; a sewage treatment station has been set up for waste water from production and experiments, which when reaching the standard is discharged into the municipal sewage pipe network of the industrial park, and finally discharged into Shuangqing Waste Water Treatment Plant for centralized treatment. Also, its environmental protection facilities could run stably, and the synchronous operation of the facilities is up to the requirements.


4. Henan SKSHU Paint Co., Ltd. (Henan Factory)

Strictly following the requirements of the "Three Simultaneities" for construction projects, it has built various environmental protection facilities to ensure the stable and qualified discharge of various environmental factors. A set of bag-type pulse dust collectors are built in the workshops to remove the dust in the exhaust gas and discharge it after reaching the standard; also, a sewage treatment station is set up to treat the waste water from reactors, workshop floors and laboratories, which, after reaching the standards, will be discharged to Nanzhao County Sewage Pumping Station and finally to Nanzhao County Sewage Treatment Plant for centralized treatment. Its protection facilities could run stably, and the synchronous operation of the facilities meets the requirements.


5. Sichuan SKSHU Paint Co., Ltd. (Sichuan Factory)

Its environmental protection facilities were equipped in strict accordance with the requirements of the "Three Simultaneities" for construction projects and of the environmental impact report. The dust-containing gas produced during the production at the water-based paint workshops is discharged according to the standards after being treated by sedimentation filter cartridge dust collectors; the organic waste gas containing dust produced in the oil-based paint workshops is pre-treated by down-flow filter cartridge dust collectors, treated by molecular sieve adsorption and concentration wheels + RTO waste gas treatment facilities, and discharged after it is up to the Integrated Emission Standard for Air Pollutants (GB16297-1996), Sichuan Emission Control Standard for Volatile Organic Compounds (DB51/2377-2017) and Emission Standards for Odor Pollutants (GB 14554-93). Moreover, the waste water and domestic sewage in the factory are treated by the sewage treatment stations in the factory. The waste water from production is treated by "efficient air flotation+micro electrolysis", and then treated by "anaerobic biofilter+biological contact oxygen" together with domestic sewage. After reaching the third grade standards in Table 4 of Integrated Wastewater Discharge Standard (GB8978-1996), it enters the Third Sewage Treatment Plant of Qionglai City through the municipal sewage pipe network for treatment before discharging into the Xiejiang River.


III. Types, Quantities and Destinations of Pollutants Discharged

1. Types, quantities and destinations of pollutants discharged by SKSHU Paint Co., Ltd. (Putian Factory)

(1) The main pollutants discharged from waste gas include non-methane total hydrocarbons, benzene, toluene, xylene, particulate matters, SO2 and nitrogen oxides, and the emission test data on exhaust from the main workshops are shown in the following table:

Notes: 

1. Source of test data: Test Reports of Centre Testing International dated June 27, 2018 (No.:EDD11K001314) and August 31, 2018 (No.:EDD11K001548aR1a)

2. After treatment by the company's sewage treatment stations, the sewage is discharged into the municipal sewage pipe network and merged into the Minzhong Waste Water Treatment Plant for centralized treatment:

(1)Source of test data: Test Report of Centre Testing International on June 29, 2018 (EDD11K001339)


2. Types, Quantities and Destinations of Pollutants Discharged by Fujian Sanjiang Packaging Co., Ltd.

The main pollutants discharged from waste gas include benzene, toluene and xylene.

Note: Source of test data: Test report of Centre Testing International issued on August 10, 2018 (No.:EDD11K001549)


3. Types, Quantities and Destinations of Pollutants Discharged by Tianjin SKSHU Paint Co., Ltd. (Tianjin Factory)

(1) The main pollutants discharged by waste gas include non-methane total hydrocarbons and particulate matters.

Note: Source of test data: Beijing Hangfeng Zhongtian Testing Technology Service Co., Ltd on June 20, 2018 (No. HF1806267)

(2) After treatment by the sewage treatment stations of the company, the sewage is discharged into the municipal sewage pipe network and merged into Shuangqing Waste Water Treatment Plant for centralized treatment:

Note: Source of test data: Tianjin Yunmeng Testing Technology Service Co., Ltd. on June 8, 2018 (No. YMBG18060802)


4. Types, Quantities and Destinations of Pollutants Discharged by Sichuan SKSHU Paint Co., Ltd. (Sichuan Factory)

(1) The main pollutants discharged by waste gas include non-methane total hydrocarbons and particulate matters.

Note: Sources of test data: Monitoring Report on Environmental Protection Assessment and Approval after Completion of Paint Production and Supporting Project (60,000t/a Emulsion Paints, 50,000t/a Natural Stone and Texture Paints, 30,000t/a Putty Powder and 700t/a Water-based Wood Paint Production Lines) of Sichuan SKSHU Paint Co., Ltd., and Monitoring Report on Environmental Protection Assessment and Approval after Completion of Paint Production and Supporting Project (15,000t/a Water-based Adhesives, 12 million Packaging Cans/a, 29,300t/a Wood Paints and 5,000t/a Curing Agents Production Lines) of Sichuan SKSHU Paint Co., Ltd.


(2) After reaching the standard through the sewage treatment station of the company, the sewage will be discharged into the Third Sewage Treatment Plant of Qionglai City through the municipal pipe network for treatment. Data on main pollutants detected are shown in the following table:

Note: Source of test data: Monitoring Report on Environmental Protection Assessment and Approval after Completion of Paint Production and Supporting Project (15,000t/a Water-based Adhesives, 12 million Packaging Cans/a, 29,300t/a Wood Paints and 5,000t/a Curing Agents Production Lines) of Sichuan SKSHU Paint Co., Ltd.


5. Types, Quantities and Destinations of Pollutants Discharged by Henan SKSHU Paint Co., Ltd. (Henan Factory)

(1) The main pollutants discharged by waste gas include non-methane total hydrocarbons and particulate matters.

Note: Sources of testing data: Testing Report of Henan Micrometer Testing Technology Co., Ltd. on June 26, 2018 (testing values of latex paint workshops and texture workshops), and Testing Report of Nanyang Guangzheng Detection Technology Co., Ltd. (exhaust gas index data of can making workshops)


(2) After treatment by the sewage treatment stations of the company, the sewage is discharged into the sewage pumping station of Nanzhao County Industrial Agglomeration Zone, and finally discharged into Nanzhao County Sewage Treatment Plant for centralized treatment. Data on main pollutants detected are shown in the following table:

Note: Source of test data: Test Report by Henan Micrometer Testing Technology Co., Ltd. on June 24, 2018

 

IV. Assessment of Environmental Impact on Construction Projects and other Administrative Licensing on Environmental Protection

1. SKSHU Paint Co., Ltd.

2. Sichuan SKSHU Paint Co., Ltd.

3. Tianjin SKSHU Paint Co., Ltd.

4. Henan SKSHU Paint Co., Ltd.

5. Anhui SKSHU Paint Co., Ltd.

 

V. Emergency Plans on Environmental Emergencies

With reference to Guidelines for Preparing Environmental Emergency Plans for Petrochemical Enterprises and Information Reporting Methods for Environmental Emergencies, all 3TREES factories have prepared their own Emergency Plans for Environmental Emergencies, which have been reviewed by experts and reported to the local environmental protection bureaus and placed in the official archives.


The drills conducted according to emergency plans in 3TREES factories mainly include: (1) Each workshop organizing safety activities or training twice a month; (2) Organizing large-scale comprehensive emergency drills for key devices and parts at least once a year. For example: 3TREES (Putian Factory) held an RTO device fire emergency rescue and environmental emergency response drill in May 2018; 3TREES (Putian Factory) held early warnings of raw material leakage in the storage tank area and the on-site rescuing drill against fire accidents in November 2018; 3TREES (Tianjin Factory) staged an emergency drill for large-scale leakage accidents in June 2018; 3TREES (Henan Factory) conducted workshop emergency handling and emergency evacuation drills in June 2018; 3TREES (Sichuan Factory) organized an emergency rescue drill for solvent leakage and fire accidents in pump room of raw material storage tank area in May 2018; and 3TREES (Sichuan Factory) organized an emergency drill for vinyl acetate leakage and fire accidents in white glue workshop in November 2018 .

Leave Your Message